Lucent Technologies 4.1 manual Current restriction displays

Programming

To restrict an extension from making calls on a specific line:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 0 ] [ 2 ].

2.At the Extension: prompt, enter the number of the extension to be

programmed. For example, to program extension 23, press [ 2 ] [ 3 ].

3.At the Line: prompt, enter the line number to be restricted at this extension. For example, to restrict line 2, press [ 0 ] [ 2 ].

The current restriction displays.

4.To change the line restriction for this extension, press [ Next Data ] until the appropriate value displays—see “Valid Entries” on the previous page.

5.At this point:

■To restrict another line at this extension, press [ Next Item ] or [ Prev Item ] until the line number shows on the display. Then repeat Step 4.

■To restrict another extension, press [ Next Procedure ] [ Prev Procedure ] and begin at Step 2.

6.Select another procedure or exit programming mode.

Line Access Restriction (#302) 5-117