Ring on Transfer (#119)

Description

This System Programming procedure lets you specify what callers hear while they are being transferred. If Ring on Transfer is set to Active, callers hear ringing as they are being transferred; it it is set to Not Active, callers hear silence unless Music On Hold is activated and an audio source is connected to the primary processor module. If this is the case, callers hear music while the call is being transferred to the destination extension. Once there, callers hear ringing until the call is answered or it is sent to the voice messaging system.

Related Features

If you have an audio source connected to the primary processor module, set Music On Hold (#602) to Active and Ring on Transfer to Not Active, so callers hear music as they are being transferred to the destination extension.

This procedure has no effect on Direct Extension Dial or Call Park.

Valid Entries

1 = Active

2 = Not Active

Programming

To change Ring on Transfer

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 1 ] [ 9 ].

2.Press [ Next Data ] until the appropriate value displays.

3.Select another procedure or exit programming mode.

Ring on Transfer (#119) 5-163

Page 260
Image 260
Lucent Technologies 4.1 manual Ring on Transfer #119, Related Features