Lucent Technologies 4.1 manual Dialing Restrictions and Permissions

System Programming Quick Reference

Place the Programming Overlay on the dialpad of the system display phone at extension 10 or 11

TO START SYSTEM PROGRAMMING

PRESS [ Feature ] [ 0 ] [ 0 ]

PRESS [ System Program ]

PRESS [ System Program ]

TO END SYSTEM PROGRAMMING

PRESS [ Feature ] [ 0 ] [ 0 ]

TO USE A SPECIFIC PROCEDURE

DIAL [ # ] and three-digit procedure code

Example: [ # ] [ 1 ] [ 0 ] [ 1 ] for System Date

TO CYCLE THROUGH SYSTEM PROGRAMMING PROCEDURES

PRESS [ Next Procedure ] or [ Prev Procedure ]

NOTE: Procedures #399, #609, and #728—shown below in dashed boxes—are skipped when cycling.

TO CYCLE THROUGH AVAILABLE SETTINGS

PRESS [ Next Data ] or [ Prev Data ]

TO RETURN TO FACTORY SETTING

PRESS [ Remove ]

Dialing Restrictions and Permissions

OUTGOING CALL RESTRICTION

DIAL #401 (p. 5-144)

DIAL an extension number (10–57)

DIAL 1 = No Restriction ✔

2 = Inside (intercom) Only

3 = Local (intercom and local) Only

PRESS [ Next Item ] to program another extension

TOLL CALL PREFIX		(p. 5-186)
DIAL #402
DIAL 1	= 0/1 plus Area Code
	and Number ✔
2	= Area Code and
Number Only
SYSTEM PASSWORD		(p. 5-180)
DIAL #403

DIAL four digits to set the password

DISALLOWED PHONE NUMBER

LISTS (p. 5-71)

DIAL #404

DIAL a list number (1–4)

DIAL a list entry (01–10)

To add entry:

DIAL the telephone number (up to

12digits)

PRESS [ Enter ]

PRESS [ Remove ] to remove a list entry

PRESS [ Next Item ] to program another list entry

To program another list:

PRESS [ Next Procedure ] [ Prev Procedure ],

enter a new list number, and repeat above steps

DISALLOWED LIST ASSIGNMENTS

DIAL #405 (p. 5-70)

DIAL an extension number (10–57) DIAL a list number (1–4)

DIAL 1 = Assigned

2 = Not Assigned ✔

PRESS [ Next Item ] to assign another list

To program another extension:

PRESS [ Next Procedure ] [ Prev Procedure ],

enter a new extension number, and repeat above steps

EMERGENCY PHONE NUMBER

LIST	(p. 5-82)
DIAL #406
DIAL a list entry (01–10)
To add entry:
DIAL	the telephone number (up to

12digits)

PRESS [ Enter ]

PRESS [ Remove ] to remove a list entry

PRESS [ Next Item ] to program another list entry

ALLOWED PHONE NUMBER

LISTS	(p. 5-9)
DIAL	#407
DIAL	a list number (1–4)
DIAL	a list entry (01–10)
To add entry:
DIAL	the telephone number (up to

12digits)

PRESS [ Enter ]

PRESS [ Remove ] to remove a list entry

PRESS [ Next Item ] to program another list entry

To program another list:

PRESS [ Next Procedure ] [ Prev Procedure ],

enter a new list number, and repeat above steps

ALLOWED LIST ASSIGNMENTS

DIAL #408		(p. 5-8)
DIAL	an extension number (10–57)
DIAL	a list number (1–4)
DIAL	1 = Assigned
	2 = Not Assigned ✔

PRESS [ Next Item ] to assign another list

To program another extension:

PRESS [ Next Procedure ] [ Prev Procedure ],

enter a new extension number, and repeat above steps

FORCED ACCOUNT CODE LIST

DIAL	#409	(p. 5-92)
DIAL	a list entry (01–99)
To add entry:
DIAL	the account code (up to

6digits)

PRESS [ Enter ]

PRESS [ Remove ] to remove a list entry

PRESS [ Next Item ] to program another list entry

System Speed Dial Numbers (p. 5-182)

To program a number:

PRESS [ Feature ] [ 0 ] [ 0 ] to enter programming mode PRESS [ Feature ] DIAL a three-digit code (600–699)

DIAL the telephone number—up to 28 digits including special characters (see page

5-173)To “mark” it (to override restrictions), dial [ ★ ] before the telephone number

To program another number, or to change a number, repeat

PRESS [ Feature ] [ 0 ] [ 0 ] to exit programming mode

To remove a number:

PRESS [ Feature ] [ 0 ] [ 0 ] to enter programming mode

PRESS [ Feature ]

DIAL the System Speed Dial number’s code (600–699)

PRESS [ Mic/HFAI ]

To remove another number, repeat

PRESS [ Feature ] [ 0 ] [ 0 ] to exit programming mode