Lucent Technologies 4.1 manual Intercom Dial Tone #309, Considerations

Intercom Dial Tone (#309)

Description

This System Programming procedure determines the type of dial tone that the system provides at an extension. It may be necessary to change this setting to Machine (outside line) dial tone for an autodialing device, such as a fax or modem, that has trouble making calls. For example, if you have a modem that checks for outside line dial tone before dialing, use this procedure to change from Regular to Machine dial tone.

Considerations

Use this procedure only if an autodialing device has trouble making calls.

Valid Entries

1 = Regular dial tone ✔

2 = Machine (outside line) dial tone

Programming

To change the Intercom Dial Tone setting for an extension:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 0 ] [ 9 ].

2.At the Extension: prompt, enter the number of the extension to be

programmed. For example, to select extension 22, press [ 2 ] [ 2 ].

3.To change the Intercom Dial Tone setting, press [ Next Data ] until the appropriate value displays.

4.To program another extension, press [ Next Item ] or [ Prev Item ] until the extension number shows on the display. Then repeat Step 3.

5.Select another procedure or exit programming mode.

Intercom Dial Tone (#309) 5-111