Lucent Technologies 4.1 manual Internal Hotline Ext 33 Data

Programming

To identify a hotline extension and its alert extension:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 6 ] [ 0 ] [ 3 ].

2.At the Extension: prompt, enter the hotline extension number—see “Valid

Entries” on the previous page. For example, to program extension 33 as the hotline, press [ 3 ] [ 3 ].

3.At the Data --prompt, enter the alert extension number—see “Valid Entries” on the previous page. For example, to program extension 32 as the alert extension, press [ 3 ] [ 2 ]. A display similar to the following appears:

Internal Hotline Ext 33 Data 32

4.At this point:

■To change the hotline and alert extension numbers you just entered, repeat Steps 2 and 3.

■To delete the existing hotline and alert extension numbers, press

[ Remove ].

■ To identify another hotline and alert extension pair, press [ Next Item ] or [ Prev Item ] until the new hotline extension number shows on the display. Then repeat Step 3.

5.Select another procedure or exit programming mode.

Using

To use the hotline phone:

1.Lift the handset of the hotline phone. The designated alert extension rings.

2.When the call is answered, speak into the handset.

5-108Hotline (#603)