Lucent Technologies 4.1 manual ASA Button Assigned Ext10

Considerations

■An Automatic System Answer button must be programmed on a button with lights on the system display phone at extension 10. (This feature will not work if it is programmed on a button without lights.)

■Automatic System Answer can handle up to three outside calls simultaneously.

Valid Entries

1 = Assigned

2 = Not Assigned ✔

3 = Select button (then press a programmable button to assign Automatic System Answer to that button)

Programming

To assign or unassign an Automatic System Answer button with lights at extension 10:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 1 ] [ 1 ].

2.If you want to assign Automatic System Answer to the first available button,

press [ Next Data ] until a display similar to the following appears:

ASA Button

1 Assigned - Ext10

If you want to unassign Automatic System Answer, press [ Next Data ] until a display similar to the following appears:

ASA Button

2 Not Assigned

If you want to assign Automatic System Answer to a specific button, press [ 3 ]. A display similar to the following appears:

ASA Button

3 Select a Button

Then press a programmable button with lights to assign Automatic System Answer to that button.

3.Select another procedure or exit programming mode.

4.Label the Automatic System Answer button at extension 10.

5-22Automatic System Answer Button (#111)