![](/images/new-backgrounds/1261850/261850503x1.webp)
Considerations
■You cannot assign pool buttons to extension 10 or to any key extension.
■The main pool buttons are always assigned to the two leftmost buttons on the bottom row of a system phone. You cannot use Select Button (Setting 3) for the main pool (880) during Pool Extension Assignment programming.
■If you select Not Assigned (Setting 2) for the main pool (880) during Pool Extension Assignment programming, the main pool is removed from the two leftmost buttons on the bottom row of the system phone at that extension. The buttons are then available for programming lines, auxiliary pools, or system features. If the main pool is ever reassigned to that extension, previous programming will be erased.
■Auxiliary pool buttons will be located next to the main pool buttons unless you select Setting 3 to choose a button location when programming.
■You can assign up to four pools to a standard phone, but a
Valid Entries
1 = Assigned ✔ Main pool
2 | = Not Assigned ✔ Auxiliary pool |
3 | = Select Button (auxiliary pools only) then press a button to assign the |
| auxiliary pool to that button |
Programming
To assign pools to a pooled extension:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 1 ] [ 4 ].
2.Enter the extension number to be programmed
program extension 15, press [ 1 ] [ 5 ].
There is a steady red light next to each button that has a line assigned and a flashing red light next to each button that has a pool assigned. To remove all existing pool assignments, press [ Remove ] before selecting a pool.
3.Enter the desired pool access code (880, 881, 882, or 883). For example, to select pool 881, press [ 8 ] [ 8 ] [ 1 ].
Pool Extension Assignment (#314) |
|