Loudspeaker Paging (I70)
Description
This feature accesses the loudspeaker paging system, if you have one connected to the system through the PAGE jack on the primary processor module.
Related Features
■Users can make Simultaneous Paging announcements over the loudspeaker paging system and the idle system phones assigned to Calling Group 1. See Calling Group Extensions (#502) to program Calling Group 1.
■You can specify the loudspeaker paging system as a hotline alert extension so that the hotline phone can be used to make announcements over the loudspeaker. For more information, see Hotline (#603).
Considerations
■You can program a Loudspeaker Paging button on a system phone to access the loudspeaker with one touch.
■If the loudspeaker paging system is in use, a user attempting to make an announcement hears a busy tone.
Programming
To program a Loudspeaker Paging button:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.Enter the number of the extension to be programmed with this feature.
3.Press a programmable button.
4.Press left [ Intercom ] [ 7 ] [ 0 ].
5.Program another button for this extension or exit programming mode.
Using
System Phone
To make an announcement over the loudspeaker paging system:
1.Press the programmed button or [ Intercom ] [ 7 ] [ 0 ], then lift the handset.
2.Speak into the handset. (To avoid feedback, do not use the speakerphone.) Your voice is heard through the loudspeaker paging system.
If your paging system supports announcements to zoned areas, refer to the instructions packaged with the device to make zoned announcements.
