Lucent Technologies 4.1 manual To program a Manual Signaling button

Programming

To program a Manual Signaling button:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].

2.Enter the number of the extension to be programmed with this feature.

3.Press a programmable button.

4.Press [ Feature ] [ 1 ] [ 3 ].

5.Dial the two-digit extension number of the target extension. For example, to

identify extension 22 as the target extension, press [ 2 ] [ 2 ]. (Enter [ ★ ] before the extension number if you want to use the button for voice signaling.)

6.Program another button for this extension or exit programming mode.

Using

■To beep the target extension:

1.While the handset is in the cradle, press the programmed button. The extension beeps for as long as the button is pressed.

■To ring or voice signal the target extension:

1.Lift the handset or press [ Spkr ]

2.Press [ Intercom ].

3.Press the programmed button.

■To transfer a call to the target extension:

1.While active on the call, press [ Transfr ].

2.Press the programmed button.

Manual Signaling (F13XX or F13*XX) 5-133