Lucent Technologies 4.1 manual 174Special Dialing Functions

■Stop. Your local bank-by-phone service requires that you enter a password before the account number. To program a Personal Speed Dial number or an Auto Dial button to call the bank at 555-7898, include a stop for manually entering the password, and continue with the account number (679 88), enter [ 5 ] [ 5 ] [ 5 ] [ 7 ] [ 8 ] [ 9 ] [ 8 ] [ Mic/HFAI ] [ 6 ] [ 7 ] [ 9 ] [ 8 ] [ 8 ].

■Touch-Tone Enable. Your system is connected to rotary lines but you want to call an answering machine at 555-3454 to retrieve messages. Since the machine requires touch tones, enter [ 5 ] [ 5 ] [ 5 ] [ 3 ] [ 4 ] [ 5 ] [ 4 ] [ Transfr ]. All digits pressed during the rest of the call are sent as touch tones.

■On/off Centrex Feature Button. To include both the activation and deactivation codes for a Centrex feature on the same button, press [ Mic/HFAI ] to include a stop between the two codes. For instance, if the code to activate a Centrex feature is *30 and the code to deactivate the feature is *31, store [ ★ ] [ 3 ] [ 0 ] [ Mic/HFAI ] [ ★ ] [ 3 ] [ 1 ] on the Auto Dial button.

The first time you press the Auto Dial button, only the number before the stop is dialed (to activate the feature). When you press the button again, the rest of the stored number is dialed (to deactivate the feature).

■Number Outside a PBX or Centrex System. To store a number that dials out of a PBX or Centrex system, include a dial-out code in the Speed Dial number. This entry, to dial the number 201 555-4321, includes a dial-out code, a 1.5-second pause, and a toll call prefix of 1 for direct dialing (which may not be required for your dialing area): [ 9 ] [ Hold ] [ 1 ] [ 2 ] [ 0 ] [ 1 ] [ 5 ] [ 5 ] [ 5 ] [ 4 ] [ 3 ] [ 2 ] [ 1 ].

5-174Special Dialing Functions