Lucent Technologies 4.1 manual 121

4.At this point:

■If you want to assign the line to the first available button with lights, press [ Next Data ] until a display similar to the following appears:

Line Assignment 15 L01

1Assigned

■If you want to remove a line assignment, press [ Next Data ] until a display similar to the following appears:

Line Assignment 15 L01

2Not Assigned

■If you want to assign the line to a specific button, press [ 3 ]. A display similar to the following appears:

Line Assignment 15 L01

3Select a Button

Then press a button with lights to assign the line to that button. If you use option 3 after a line has been assigned, the line moves from the old button to the new button you select.

5.At this point:

■To program another line for this extension, press [ Next Item ] or [ Prev Item ] until the line number shows on the display. Then repeat Step 4.

■To program another extension, press [ Next Procedure ] [ Prev Procedure ] and begin at Step 2.

6.Select another procedure or exit programming mode.

Line Assignment (#301) 5-121