Lucent Technologies 4.1 manual Pool Ext Assign 15 P881 Assigned

4.At this point:

■If you want to assign the pool to the first available button with lights, press [ Next Data ] until a display similar to the following appears:

Pool Ext Assign 15 P881

1Assigned

■If you want to remove a pool assignment, press [ Next Data ] until a display similar to the following appears:

Pool Ext Assign 15 P881

2Not Assigned

■For auxiliary pools only, if you want to assign the pool to a specific button, press [ 3 ]. A display similar to the following appears:

Pool Ext Assign 15 P881

3Select a Button

Then press a button with lights to assign the auxiliary pool to that button. If you use option 3 after an auxiliary pool has been assigned, the auxiliary pool moves from the old button to the new button you select.

5.At this point:

■To assign another pool for this extension, press [ Next Item ] or [ Prev Item ] until the pool access code shows on the display. Then repeat Step 4.

■To program another extension, press [ Next Procedure ] [ Prev Procedure ] and begin at Step 2.

6.Select another procedure or exit programming mode.

5-156Pool Extension Assignment (#314)