Valid Entries
1 = Assigned
2 = Not Assigned ✔
Programming
To change the Voice Interrupt On Busy setting for an extension:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 1 ] [ 2 ].
2.Enter the number of the extension to be programmed with this feature.
3.To assign or unassign Voice Interrupt On Busy, press [ Next Data ] until the
appropriate value displays.
4.Select another procedure or exit programming mode.
Using
To initiate a voice interrupt on busy call:
1.From a system phone, press [ Intercom ].
2.Press [ ★ ] plus a
3.Listen for one of the following responses:
■If you hear one beep, you have reached an idle system phone. You can speak after the beep.
Your voice is heard through the other extension’s speaker. If the recipient is present, he or she can reply.
■If you hear two beeps, you have reached a busy system phone with Voice Interrupt On Busy Assigned. You can speak after the beeps. Be aware that the third party to whom the recipient is speaking probably also will hear the two beeps and the faint sound of your voice.
If the recipient has a Voice Interrupt On Busy
■If you hear ringing, you have reached a standard phone, an idle MDC 9000 or MDW 9000 phone, or a busy system phone with Voice Interrupt On Busy Not Assigned. Your call is not completed until someone answers.
Voice Interrupt On Busy (#312)
