Trouble Hearing Called Party Answer
Possible Cause 1: If you are using a speakerphone, there may be environmental factors that affect the performance of the speaker or microphone (for example, too much background noise).
What to do: See “Speakerphone Performance Tips” in Chapter 3 for suggestions on the proper use of the speakerphone. If the problem is not solved, go to Possible Cause 2.
Possible Cause 2: If the system is set for
What to do: Reset the interval using Rotary Dialing Timeout (#108).
■If you can hear the called party answer, the problem is solved.
■If the problem is not solved, call the hotline.*
Using the Recall Feature Has No Effect
Possible Cause: Recall Timer Duration setting is too short.
What to do: Increase the Recall Timer Duration (#107) by 100 milliseconds.
■If the Recall feature works, the problem is solved.
■If the Recall feature still does not work, continue increasing the Recall Timer Duration by increments of 100 milliseconds until the problem is solved.
Using the Recall Feature Disconnects Call
This problem applies when the system is installed behind a PBX or Centrex system or with the local phone company’s “Call Waiting” feature.
Possible Cause: Recall Timer Duration setting is too long.
What to do: Decrease the Recall Timer Duration (#107) by 100 milliseconds.
■If the Recall feature works properly, the problem is solved.
■If the Recall feature still disconnects calls, continue decreasing the Recall Timer Duration by increments of 100 milliseconds until the problem is solved.
✽In the continental U.S., help is available at 1 800
