Lucent Technologies 4.1 manual Specifications A-3

Electrical Requirements

■U.S. and Canada: 90–130 VAC, 50–60 Hz, 3-prong outlet separate ground, separately fused at 15 Amps

Other countries: 90–264 VAC, fused at 10 Amps

■Outlet must not be controlled by an on/off switch

■Grounding to comply with Underwriters Laboratories (UL) 1459:

A.An insulated grounding conductor that is not smaller in size and equivalent in insulation material and thickness to the grounded and ungrounded branch circuit supply conductors, except that it is green with or without one or more yellow stripes, is to be installed as part of the circuit that supplies the product or system.

B.The grounding conductor mentioned in item A is to be connected to ground at the service equipment.

C.The attachment-plug receptacles in the vicinity of the product or system are all to be of a grounding type, and the grounding conductors serving these receptacles are to be connected to earth ground at the service equipment.

Requirements for Out-of-Building Extensions

Installation of a telephone or other standard (tip/ring) device in another building requires the following In-Range Out-of-Building (IROB) protectors to protect the control unit and device from electrical surges:

■System phone: two Lucent Technologies IROB protectors

■Standard device: one Lucent Technologies IROB protector plus carbon block protection

Wiring	■	System phones: Lucent Technologies SYSTIMAX® Bulk Nonplenum (DIW) cable, Lucent
		Technologies SYSTIMAX Bulk Plenum (HALAR/HALAR) cable, or at least 2-pair (4-wire) star
		(“home run” not “loop”)
	■	Other standard telecommunications equipment (single-line phones, fax machines, answering
		machines, etc.): 1-pair (2-wire) mounting cords (Lucent Technologies D2R mounting cords
		recommended)
	■	Bridging adapter: Lucent Technologies 267F2
	■	Range: 1,000 feet (305 meters) for system phones; 3,000 feet (915 meters) for standard devices
Safety	■	U.S.: Meets UL 1459 Issue 2
Requirements	■	Canada: Meets CSA C22.2, 225
	■	All other countries: Meets IEC950 Second Edition and EN60950 Second Edition
Government	■	U.S.:	FCC Part 68
Approvals and			FCC registration number (U.S.): KF: AS5 USA-61630-KF-E
Local Phone			MF: refer to FCC Reg. No. on side of carrier
Company			FCC Part 15 Class A
Information			REN (outside line jack): 0.9A per line jack
			Jack type: RJ11C
			Loop start lines
	■	Canada:	IC CP01, Issue 7
			IC registration number (Canada): 230 3756A
			IC CS03, Issues 6 & 7
			Load Number = 7
			Loop start lines

Specifications A-3