Panasonic KX-TVP200 installation manual DPT Integration Features

4.1 GUIDELINES FOR DPT INTEGRATION

Table 4-1

DPT INTEGRATION FEATURES

Caller Name Announcement	The VPS announces the prerecorded Caller ID
(System/Personal)*	callers’ names when: (1) extension users listen to
	messages from assigned numbers left in their
	mailboxes, (2) the VPS transfers calls from assigned
	numbers to the users, and (3) the VPS pages the
	users by intercom.
	If the same Caller ID number is programmed for both
	system and personal caller name announcements,
	the VPS will use the personal caller name.
Caller ID Call Routing*	The VPS automatically sends calls from pre-assigned
	Caller ID numbers to the desired extension, mailbox
	or Custom Service.
Personal Greeting for Caller ID*	Each subscriber can record up to 4 personal greeting
	messages for special callers.
Time Synchronisation	Whenever the PBX sets a new date and time or when
	DPT Integration is established, the data is
	automatically registered in the VPS.

*Caller ID Note 1: When an incoming outside call reaches the VPS via the PBX, the VPS will wait about 2 rings before answering the call to receive the Caller ID information properly from the PBX.

This waiting time can be changed by using the WCID command (see 7.2.20 Wait for Caller ID (WCID) in 7.2 UTILITY COMMANDS).

Caller ID Note 2: In the documentation for the KX-TD816/1232/612 series PBX, the Caller ID feature is called CLIP (Calling Line Identification Presentation).

Note

Depending on the model and/or the software version of the connected PBX (see 3.1.1 DPT or Inband Signalling?), you may not be able to utilise some of the features listed above. For more information, consult your dealer.

Installation Manual

77