Panasonic KX-TVP200 Backing UP the System, Following steps are for HyperTerminal as an example

6.3 BACKING UP THE SYSTEM

6.3BACKING UP THE SYSTEM

1.Choose the Utility Command. Type [SAVE], then Press ENTER. See screen output below.

From System Administration Top Menu:

Enter The Number : = 3 Utility Command

$ SAVE

VPS DISK Data Save ( VPS -> PC : Xmodem )

1:Program

2:Parameters

3:System Prompts

4:User Prompts-1

5:User Prompts-2

6:Custom Service Menus

7:Personal Greetings

8:Company Greetings Select No. : = 2

2.To start, Press [2] and then ENTER.

3.Press RETURN or ENTER.

Following steps are for HyperTerminal as an example.

4.Select Receive File from the Transfer Menu.

5.Specify a folder where data is to be saved (if necessary, use "Browse").

6.Select Xmodem as the protocol to save data.

7.Click "Receive".

8.Enter desired filename and click "OK".

The file transfer screen appears and shows download progress. Download time will vary depending on the communication speed and file sizes.

"SAVE Completed" will appear on the screen when the file has been saved. Continue saving the other items as needed. It is not necessary to save the "Program" or "System Prompts" because they are resident on the hard drive and cannot be altered. We do recommend all other data be saved including User Prompt 1 and User Prompt 2 (if they have been recorded).

Notes

Recorded caller names for the Caller Name Announcement (System/Personal) cannot be saved by the above procedure, only Caller ID numbers can be saved.

Installation Manual

143