Panasonic KX-TVP200 installation manual Initialising the System, System Administration Top Menu-4

7.1 INITIALISING THE SYSTEM

7.1INITIALISING THE SYSTEM

Initialising the system clears all voice data except user prompts and returns all system parameters to their default settings. Throughout this section, menu selections are indicated as "System Administration Top Menu-(Selection Number)". This means that the System Administration Top Menu must first be accessed. On the first menu displayed, make the menu selection corresponding to the first menu displayed. Repeat this process for each subsequent menu when additional selection numbers are listed.

To initialise the system, follow the menu path as shown:

System Administration Top Menu-4

Note

In the following steps (steps 1 through 6), the output of the VT100 TERMINAL mode is presented. The output of the ASCII TERMINAL mode is slightly different. For example, in Step 1, "5: Quick Setup" does not appear when you are in the ASCII TERMINAL mode. There are other differences, but the basic steps are the same.

1.Go to the System Administration Top Menu

1 : Program

2 : System Reports

3 : Utility command

4 : System Reset/Clear

5 : Quick Setup

SELECT ITEM and PRESS Return-Key

2.Type [4] for System Initialisation.

System Reset/Clear Menu

Mailbox No. Length :3

System Manager's Mailbox No. :999

Message Manager's Mailbox No. :998

Will you change the settings ? (Y/N): =

Note

Depending on the PBX extension numbering, the "Mailbox No. Length" might be 2 to 5.

146 Installation Manual