Panasonic KX-TVP200 installation manual Utility Commands, System Administration Top Menu-3

7.2 UTILITY COMMANDS

7.2UTILITY COMMANDS

In the Utility Command Mode, the System Administrator can access the functions described below by entering the appropriate command at the "$" prompt, and Pressing RETURN.

To select the Utility Commands Menu, follow the menu path as shown:

System Administration Top Menu-3

Utility Command (Type 'HELP' for command list.)

$

Table 7-1

OFLN:	Sets the system to off-line mode
ONLN:	Sets the system to on-line mode
PASS:	Sets the System Administrator’s password
TIME:	Sets the system clock, date, and time
PSET:	Specifies the time reports will be printed
ELOG:	Displays device error log
SAVE:	Stores a backup of the programme or data in the hard disk
LOAD:	Restores a backup of the programme or data to the VPS
GPRN:	Displays all of the VPS parameters
VERS:	Displays the version of the programme
CREP:	Displays the keypad assignments, message recording status and the
	tree-structure of a Custom service
CCLR:	Clears a Custom service menu access count
MWL:	Specifies the number of times the VPS attempts to turn on the
	message waiting lamp on the extensions
MRL:	Sets the minimum recording length of a message
MPLT:	Displays the user prompt recording status
HELP:	Displays brief instructions and a list of Utility Commands
QSET:	Perform a basic setup of your VPS so that you can use it quickly
LMON:	Line Monitor
PUTD:	Displays Touchtone Information
WCID:	Wait for Caller ID

148 Installation Manual