Panasonic KX-TVP200 installation manual Disable, Mwl

B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS

Table B-7

Parameter		Value Range		Description/Function
		(Default)
Authorization	1.	Yes	If set to "Yes", subscribers are able to utilise the
for Message	2.	No	Message Waiting Notification feature. The sub-
Notification		(No)	parameters to be set include Beeper Callback No. Entry
			Mode, MWL Notification for Unreceived Message, and
			Device Notification for Unreceived Message. If set to
			"No", sub-parameters cannot be assigned.
			Note: This parameter in COS No.1 is set to "Yes" when
			the Quick Setup procedure is used to create Subscriber
			Mailboxes.
Beeper	1.	Caller Select	Permits subscribers to use the Callback Number Entry
Callback	2.	Without	feature.
No. Entry	3.	Before
Mode	4.	After	Caller	After recording a message, the caller is
	5.	Disable
		(Disable)	Select:	asked if the message is urgent. If urgent,
				the caller is asked to enter the callback
				number.
			Without:	Without recording a message, the caller is
				asked to enter the callback number.
			Before:	Before recording a message, the VPS asks
				the caller to enter the callback number.
			After:	After recording a message, the VPS asks
				the caller to enter the callback number.
			Disable:	Disables the Callback Number Entry
				feature.
			Note: To utilise this feature, the callback number entry
			code must be included in the subscriber’s beeper
			(pager) number. When "Disable" is selected or if the
			caller does not enter a callback number, "System
			Callback No." (see Table B-30)will be displayed on the
			beeper’s (pager’s) display. If a caller’s number is
			received through a telephone company’s Caller ID
			service, the caller’s number will be displayed instead of
			"System Callback No.".
MWL	1.	Yes	If set to "Yes", the message waiting lamp will illuminate
Notification for	2.	No	when unplayed messages remain after the subscriber
Unreceived		(Yes)	has accessed the mailbox for Subscriber Service.
Message
Device	1.	Yes	If set to "Yes", the VPS calls the appropriate device in
Notification for	2.	No	numerical order until all unplayed messages are
Unreceived		(No)	received.
Message

220 Installation Manual