Panasonic KX-TVP200 installation manual Other Parameters-Message Waiting Notification, Yes

B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGS

Other Parameters-Message Waiting Notification

Controls the handling of message waiting notification calls.

To access the proper menu for Message Waiting Notification Parameter, follow the menu path as shown:

System Administration Top Menu-1-5-7-3

Table B-30

Parameter	Value Range	Description/Function
	(Default)
Outgoing Call	Port No.	Specifies the port numbers used for the Message Waiting
Ports	(1-12)	Notification Device feature. The VPS makes outgoing
		calls using the port specified in this parameter. At least 1
		port must be specified.
Message	Port No.	Specifies the port numbers used for the Message Waiting
Waiting Lamp	(1-12)	Notification Lamp feature.
Ports
		The VPS turns on the Message Waiting Lamp of the
		extension using the port specified in this parameter. At
		least 1 port must be specified.
Message	1. No	If set to "Yes", the VPS will turn on the Message Waiting
Waiting Lamp	2. Yes	Lamp of the extension each time a new message is
for Every	(Yes)	recorded in the mailbox. This will occur even if the
Message		Message Waiting Lamp was not turned off from a
		previous message. This setting is useful when the first
		attempt is unsuccessful.
		If set to "No", the VPS will turn on the Message Waiting
		Lamp for the first message only. The VPS will not turn on
		the lamp for subsequent messages until the subscriber
		has accessed the VPS to retrieve the messages stored
		there.
Max. Digits for	1-48 digits	Specifies the maximum number of digits the caller can
Callback No.	(20)	enter as a callback number. This number will display on
		beepers (pagers) if the "Beeper Callback No. Entry
		Mode" is enabled.
Callback No.	1-10 s	Sets the maximum allowable time between each digit on
Entry Interdigit	(5)	Beeper Callback No. Entry. If the caller does not enter
Time-Out		any digits within the specified time, the VPS will not
		accept entry of any additional digits.

Installation Manual 257