Panasonic KX-TVP200 installation manual Other Parameters-Dialing Parameter

B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGS

Table B-28

Parameter	Value Range	Description/Function
	(Default)
Numbering	2-5 digits	Specifies the first 1 or 2 digits of the PBX extension
Plan	consisting	numbers. You can add up to 16 entries to the list. Each
1-16	of 0-9, X	entry can contain 2-5 digits "0-9", and a letter "X" which
	(Numbering	matches any digit. Extension numbers cannot begin with
	Plan 2:	"0".
	2XX;
	Numbering	Examples:
	Plan 3:
		a) If valid PBX extension numbers are to be specified 201
	3XX;
	Numbering	through 264 and 301 through 364, specify the numbers
	Plan 1, 4-16:	as follows:
	None)	2XX: Indicates any 3-digit extension number starting
		with "2".
		3XX: Indicates any 3-digit extension number starting
		with "3".
		b) If valid PBX extension numbers are to be specified 400
		through 450 and 3300 through 3399, specify the
		numbers as follows:
		4XX: Indicates any 3-digit extension number starting
		with "4".
		33XX: Indicates any 4-digit extension starting with
		"33".
		Note:
		Auto Configuration will set this parameter automatically.
		The Automated Attendant will dial any 2-5 digit PBX
		extension number (except numbers beginning with "0")
		whether valid or not. If the dialled number is included in the
		numbering plan, the Automated Attendant will immediately
		send it to the PBX without waiting for further input. If not, the
		Automated Attendant will wait until the dialled number is
		recognised as an extension number, the internal inter-digit
		timer expires, or the caller dials 5 digits.
		If the number for an outgoing call is not found on the
		Numbering Plan, the VPS will consider it an outside
		number. The VPS will then attempt to dial it using the
		"Outgoing Call Setup Sequence".

Other Parameters-Dialing Parameter

To access the proper menu for Dialing Parameter, follow the menu path as shown:

System Administration Top Menu-1-5-7-2

Installation Manual 255