Panasonic KX-TVP200 installation manual Press 2 to return to b

D6 RECORDING MESSAGES

3.Press [6] to modify user prompts.

4.Press [1] to change User Prompt 1, or [2] to change User Prompt 2.

5.To change specific prompts, Go to Step 6.

To change all prompts in a row without reviewing the current recording, Go to Step 7.

6.To change specific prompts:

a)Press [1]

b)Enter the prompt number you want to change. (There is a complete list of modifiable prompts in D9 LIST OF MODIFIABLE PROMPTS.)

c)The VPS plays the prompt number.

d)Press [1] to change the prompt. If a prompt has not yet been recorded, the VPS plays the system prompt—go to Step 6g. (If you wish to turn off a certain prompt, please first record a "dummy" prompt. Then go back to Step 6 and you will be able to turn it off by going through these steps.)

Note

•Press [2] to return to Step 6b.

e)The VPS plays the current prompt. Press [1] to change the prompt.

Note

•Press [2] to retain the current recording—Return to Step 6b.

f)Press [1] to record a new prompt.

Note

•Press [2] to erase the current recording—Return to Step 6b.

•Press [3] to turn off/on the specified prompt—Return to Step 6b.

g)Record a prompt at the tone and Press [1] to end recording.

h)Press [2] to accept the recorded prompt.

Note

•Press [1] to review the recorded prompt.

•Press [3] to erase the recorded prompt and try again—Return to Step 6f.

•Press [] to erase the recorded prompt and exit—Return to Step 6b.

i)Repeat Steps 6b to 6h to record other prompts.

7.To change all prompts in a row:

a)Press [2]

b)Enter the prompt number you want to change. (There is a complete list of modifiable prompts in D9 LIST OF MODIFIABLE PROMPTS.)

c)The VPS plays the prompt number.

d)Press [1] to change the prompt.

Note

•Press [2] to go to Step 7g.

•Press [3] to turn off/on the prompt.

e)Record a prompt at the tone and Press [1] to end recording.

308 Installation Manual