Schneider Electric PM5300 manual Technical Specifications, Electrical Characteristics

PowerLogic™ PM5300 series user guide Chapter 3—Hardware Reference

Technical Specifications

Electrical Characteristics

Type of measurement: True rms on three-phase (3P, 3P + N), zero blind

Measurement accuracy

64 samples per cycle

IEC 61557-12 1	PMD/[SDSS]/K70/0.5
Active Energy 2	Class 0.5S as per IEC 62053-22
Reactive Energy 2	Class 2S as per IEC 62053-23
Active Power	Class 0.5 as per IEC 61557-12 1
Reactive Power	Class 2 as per IEC 61557-12 1
Apparent Power	Class 0.5 as per IEC 61557-12 1
Current, Phase	Class 0.5 as per IEC 61557-12 1
Voltage, L-N	Class 0.5 as per IEC 61557-12 1
Frequency	Class 0.05 as per IEC 61557-12 1
Power Factor	Class 0.5 as per IEC 61557-12 1
Voltage Harmonics	Class 5 as per IEC 61557-12 1
Voltage THD/thd	Class 5 as per IEC 61557-12 1
Current Harmonics	Class 5 as per IEC 61557-12 1
Current THD/thd	Class 5 as per IEC 61557-12 1
MID Directive (2004/22/EC)	Annex B and Annex D (PM5331 and PM5341)
	Class C
Input-voltage (up to 1.0 MV AC max, with voltage transformer)
	UL: 20-347 V L-N/35-600 V L-L
Nominal Measured Voltage range	IEC: 20-400 V L-N/35-690 V L-L
	(absolute range 35 V L-L to 760 V L-L)
Impedance	5 M Ω
F nom	50/60 Hz
Input-current (configurable for 1 or 5 A secondary CTs)
I nom	5 A
Measured Amps with over range and Crest Factor	Starting current: 5mA
	Operating range: 50mA to 8.5A
Withstand	Continuous 20 A,10s/hr 50 A, 1s/hr 500 A
Impedance	< 0.3 mΩ
F nom	50/60 Hz
Burden	<0.026VA at 8.5A
Frequency measurement
Measurement range	45 to 65 Hz
AC control power
Operating range	100 - 277 V AC L-N / 415 V L-L +/-10%
	CAT III 300V class per IEC 61010
Burden	<5 W,11 VA at 415V L-L
Frequency	45 to 65 Hz
	80 mS typical at 120V AC and maximum burden.
Ride-through time	100 mS typical at 230 V AC and maximum burden
	100 mS typical at 415 V AC and maximum burden
DC control power
Operating range	125-250 V DC ±20%
Burden	<4 W at 250 V DC
Ride-through time	50 mS typical at 125 V DC and maximum burden
Outputs
Mechanical
Max output frequency	0.5 Hz maximum (1 second ON /
	1 second OFF - minimum times)
	250 V AC at 8.0 Amps, 25 k cycles, resistive
Switching current	30 V DC at 2.0 Amps, 75 k cycles, resistive
	30 V DC at 5.0 Amps,12.5 k cycles, resistive
Isolation	2.5 kV rms
Digital outputs
Max load voltage	40 V DC
Max load current	20 mA
On Resistance	50 Ω max

© 2014 Schneider Electric All Rights Reserved 15