Schneider Electric PM5300 manual Peak demand, Predicted demand example

Chapter 9—Measurements and calculations PowerLogic™ PM5300 series user guide

Predicted demand example

Beginning
of interval	15-minute interval
Demand	Partial Interval
for last
completed	Demand
interval
1:00	1:06	1:15

Predicted demand if load is added during interval; predicted demand increases to reflect increased demand

Predicted demand if no load is added.

Time

Change in Load

Peak demand

The maximum values for the kWD, kVARD, kVAD power, and amps (or peak demand) is maintained in the meter’s non-volatile memory. The peak for each value is the highest average reading since the meter was last reset. The power meter also stores the date and time when the peak demand occurred. In addition to the peak demand, the power meter also stores the coinciding average 3-phase power factor. The average 3- phase power factor is defined as “demand kW/demand kVA” for the peak demand interval.

Related topics

•To reset peak demand values from the power meter display, see “Single resets” on page 100.

82 © 2014 Schneider Electric All Rights Reserved