Schneider Electric PM5300 manual Setting up the screen passwords, Setting up regional settings

PowerLogic™ PM5300 series user guideChapter 4—Front panel display and meter setup

Display setup parameters

Parameter		Values	Description
Contrast	1	- 9	Increase or decrease the value to increase or
			decrease the display contrast.
			Set how long (in minutes) before the backlight
Backlight Timeout (min)	0	- 60	turns off after a period of inactivity. Setting this to
			“0” disables the backlight timeout feature (i.e.,
			backlight is always on).
			Set how long (in minutes) before the screen turns
Screen Timeout (min)	0	- 60	off after a period of inactivity. Setting this to “0”
			disables the screen timeout feature (i.e., display is
			always on).

7. Press to exit. Press Yes to save your changes.

Setting up regional settings

You can change the regional settings to localize the meter screens and display data in a different language, using local standards and conventions.

NOTE: In order to display a different language other than those listed in the Language setup parameter, you need to download the appropriate language file to the meter using the appropriate firmware upgrade tool such as DLF3000. See “Downloading Firmware” on page 104.

Regional settings menu tree

Maint	Reset	Meter
	Setup	Comm
		Alarm
		I/O	Displ
		HMI	Region
		Clock	Pass

1.Navigate to Maint > Setup.

2.Enter the setup password (default is “0000”), then press OK.

3.Navigate to HMI > Region.

4.Move the cursor to point to the parameter you want to modify, then click Edit.

5.Modify the parameter as required, then press OK.

6.Move the cursor to point to the next parameter you want to modify, press Edit, make your changes, then press OK.

Regional settings setup parameters

Parameter	Values	Description
Language	English US, French, Spanish, German,	Select the language you want the meter to
	Italian, Portuguese, Chinese, Russian	display.
Date Format	MM/DD/YY, YY/MM/DD, DD/MM/YY	Set how you want the date to be displayed,
		e.g., month/day/year.
Time Format	24Hr, AM/PM	Set how you want the time to be displayed,
		e.g., 17:00:00 or 5:00:00 PM.
HMI Mode	IEC, IEEE	Select the standards convention used to
		display menu names or meter data.

7. Press to exit. Press Yes to save your changes.

Setting up the screen passwords

This can only be configured through the front panel. The factory-default setting for all passwords is “0000”. Changing the default password for screens that are password-

© 2014 Schneider Electric All Rights Reserved 39