Schneider Electric PM5300 manual Parameter Values Description

Chapter 6—Input / Output PowerLogic™ PM5300 series user guide

Digital output setup parameters available through the front panel (continued)

Parameter		Values	Description
Select Dmd System	Power, Current		Applies when Control Mode is set to Demand Sync.
			Select the demand system to monitor.
	1.	Over Current, Ph;
	2.	Under Current, Ph;
	3.	Over Current, N;
	4.	Over Current Gnd;
	5.	Over Voltage, L-L;
	6.	Under Voltage, L-L;
	7.	Over Voltage, L-N;
	8.	Under Voltage L-N;
	9.	Over kW;
	10.	Over kVAR;
	11.	Over kVA;
	12.	Lead PF, True;
	13.	Lag PF, True;
	14.	Lead PF, Disp;
	15.	Lag PF, Disp;
	16.	Over kW Dmd, Pres;
	17.	Over kW Dmd, Last;	Applies when Control Mode is set to Alarm. Select
Select Alarms	18.	Over kW Dmd, Pred;
			one or more alarms to monitor.
	19.	Over kVAR Dmd,Pres;
	20.	Over kVAR Dmd,Last;
	21.	Over kVAR Dmd,Pred;
	22.	Over kVA Dmd, Pres;
	23.	Over kVA Dmd, Last;
	24.	Over kVA Dmd, Pred;
	25.	Over Frequency;
	26.	Under Frequency;
	27.	Over Voltage Unbal;
	28.	Over Voltage THD;
	29.	Phase Loss;
	30.	Meter Powerup;
	31.	Meter Reset;
	32.	Meter Diagnostic;
	33.	Phase Reversal;
	34.	Digital Alarm S1;
	35.	Digital Alarm S2;

56 © 2014 Schneider Electric All Rights Reserved