Chapter | PowerLogic™ PM5300 series user guide |
|
|
protected prevents unauthorized personnel from accessing certain screens such as the diagnostics and reset screens.
NOTICE
LOST DATA
Record your meter's screen password information in a secure location.
Failure to follow these instructions can result in data loss.
If you lose your password, you must return the meter for factory reconfiguration, which resets your device to its factory defaults and destroys all logged data.
Password setup menu tree
Maint | Reset | Meter |
|
| Setup | Comm |
|
|
| Alarm |
|
|
| I/O | Displ |
|
| HMI | Region |
|
| Clock | Pass |
1.Navigate to Maint > Setup.
2.Enter the setup password (default is “0000”), then press OK.
3.Navigate to HMI > Pass.
4.Move the cursor to point to the parameter you want to modify, then press Edit.
5.Modify the parameter as required, then press OK.
6.Move the cursor to point to the next parameter you want to modify, press Edit, make your changes, then press OK.
Password setup parameters
Parameter | Values | Description | |
|
|
| |
Setup | 0000 - 9999 | Sets the password for accessing the meter setup | |
screens (Maint > Setup). | |||
|
| ||
Energy Resets | 0000 - 9999 | Sets the password for resetting the meter’s | |
accumulated energy values. | |||
|
| ||
Demand Resets | 0000 - 9999 | Sets the password for resetting the meter’s | |
recorded peak demand values. | |||
|
| ||
Min/Max Resets | 0000 - 9999 | Sets the password for resetting the meter’s | |
recorded minimum and maximum values. | |||
|
| ||
Diagnostics | 0000 - 9999 | Sets the password for accessing the meter’s | |
diagnostics screens. | |||
|
|
7. Press 
to exit. Press Yes to save your changes.
Lost password
If you lose your password, contact technical support for instructions on how to return your meter for factory reconfiguration.
•
•(00) + 1 (250)
NOTE: Be sure to include your meter’s serial number in your
40 | © 2014 Schneider Electric All Rights Reserved |
