PowerLogic™ PM5300 series user guide | Chapter |
Setting Up Unary Alarms
To set up unary alarms:
1.Press Unary. The unary alarm Select screen appears.
2.Press ▼ and ▲ to scroll through the list of unary alarms.
3.Press Edit to select an alarm to be configured.
4.Press Edit to select Enable.
5.Press + and - to scroll between Yes and No.
6.Press OK to enable or disable the alarm.
7.Press ▼ to select Priority.
8.Press + and - to scroll through priority options Low, None, High, or Medium.
NOTE: See “Alarm Priorities” on page 66 for more information.
9.Press OK to set the priority.
10.Press ▼ to select Select Digital Output, then press Edit.
NOTE: The digital output behavior mode must be Timed or Coil Hold to turn on when a unary alarm event occurs.
11.Press + and - to scroll through the list of digital outputs to associate with the alarm.
12.Press OK to select a digital output to be associated with the selected alarm.
13.If the selected digital output already has an association that will be lost by making the new selection, a confirmation screen appears.
—Press Yes to accept the changes and return to the previous screen.
—Press No to keep the existing configuration in use and return to the previous screen.
14.Press ▲to save all alarms selections and return to the previous screen.
15.Press ▲to save all unary alarm selections.
© 2014 Schneider Electric All Rights Reserved | 69 |
