Safety precautions, Dimension | Schneider Electric PM5300 specification

PowerLogic™ PM5300 series user guide

Chapter 3—Hardware Reference

Isolation

2.5 kVrms, double insulated

Human Machine Interface

Display type	Monochrome Graphics LCD
Resolution	128 x 128
Backlight	White LED
Viewable area (W x H)	67 x 62.5 mm
Keypad	4-button
Indicator Heartbeat / Comm activity	Green LED
Energy pulse output / Active alarm indication (configurable)	Optical, amber LED
Wavelength	590 to 635 nm
Maximum pulse rate	2.5 kHz

1For firmware version 1.1.1 and higher

2For 1A nominal CT when I > 0.15A

3Tests are conducted as per IEC 61557-12 (IEC 61326-1), 62052-11 and EN50470

Before you begin

Carefully read and follow the safety precautions before working with the meter.

Safety precautions

Installation, wiring, testing and service must be performed in accordance with all local and national electrical codes.

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH

•Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E in the USA or applicable local standards.

•Turn off all power supplying this device before working on it.

•Always use a properly rated voltage sensing device to confirm that all power is off.

•Do not exceed the device’s ratings for maximum limits.

•Always use grounded external CTs for current inputs.

Failure to follow these instructions will result in death or serious injury.

1.Turn off all power supplying this device before working on it.

2.Always use a properly rated voltage sensing device to confirm that all power is off.

Dimension

Figure 3–1: Dimension

© 2014 Schneider Electric All Rights Reserved

17

Image 17

Schneider Electric PM5300 manual Safety precautions, Dimension, Human Machine Interface

Contents

PowerLogic PM5300 Series Power and Energy Meter Page Please note Important InformationPage Hardware Refer Introduction Chapter Safety Precau TionsEnce Chapter Multi-tariff feature Chapter AlarmsChapter Power quality Chapter Input / Output Chapter Maintenance Chapter Meter resetsUpgrades Chapter Verifying accura PowerLogic PM5300 series user guide Parts and Accessories Power and Energy Meter HardwareBox Contents Introduction PowerLogic PM5300 user guide Before You Begin Safety Precautions PowerLogic PM5300 series user guide Functions and Characteristics Models, Features and OptionsPM5300 Series Models, Features and Options Functions and Characteristics Energy Values Power Quality MeasurementsDemand Values Other Measurements Electrical Characteristics Technical Specifications Environmental Characteristics Mechanical CharacteristicsSafety Electromagnetic Compatibility Human Machine Interface Safety precautionsDimension Mounting the PM5300 Meter mounting Meter wiring Screw driver type M3 Serial No Description Specification Make Part code Description Recommended cables Wiring Diagrams Symbol Description Power systemCurrent Transformer Voltage disconnect switch Direct connect voltage limits Symbol Power system setup parameters Power system descriptionMeter setting Voltage input protection Voltage and current input wiringCurrent input protection Direct connect maximum Communications Control power wiringBalanced system considerations Serial communications RS-485 network configuration RS-485 wiringRS-485 cable RS-485 maximum cable length Ethernet wiring EthernetETHERNET SwitchSWITCH/ hub/ HUB Ethernet configurationDigital outputs Ethernet communications Relay outputs Status inputsDigital output connections Status input connections Relay output connections LED indicators Front panel display and meter setupAlarm / energy pulsing LED modes Heartbeat / communications LED Related topics Notification iconsMeter screen menus PM5300 display screen menus Menu tree Meter setup screen navigation Front panel meter setupConfiguring the basic setup parameters Basic setup screen Parameter Values Description Basic setup menu treeBasic setup parameters Setting up serial communications Communications setupSerial communications setup menu tree Communication ports Ethernet communications setup menu tree Setting up Ethernet communicationsCommunications setup parameters Setting up the display HMI settingsEthernet port settings Display setup menu tree Setting up regional settings Setting up the screen passwordsDisplay setup parameters Regional settings menu tree Password setup parameters Lost passwordPassword setup menu tree Clock setup menu tree Setting the clock Advanced setupClock setup parameters Advanced setup menu tree Advanced setup parameters Setting up the alarm / energy pulsing LEDAlarm / energy pulsing LED settings menu tree LED setup parameter Power or current demand setup parameters Input / output setup Demand setupDemand setup menu tree Remote Meter Setup Multi-tariff setupAlarms setup Viewing meter data from the front panel Viewing Meter DataMeter data display screens Displaying data screens Volts U-V Power PQSHarm Energy E Hz F AlarmUnbal MnMx Using software to view meter data Using ION Setup to view or modify configuration dataTimer Maint Status Input, Digital Output Ports and Relay Output Ports Input / OutputStatus input applications Configuring status inputs using ION Setup Status input setupNavigate to I/O configuration I/O Setup Status input setup parameters available through ION Setup Status input setup menu tree Configuring status inputs using the front panel Digital output wiring example Digital output setupDigital output applications Digital output application example Digital output setup parameters available through ION Setup Configuring digital outputs using ION Setup Digital output setup menu tree Configuring digital outputs using the front panel On Time s This defines the pulse width on time in seconds Parameter Values Description Configuring relay outputs using ION Setup Relay output setupRelay output setup parameters available through ION Setup Relay output applications Set to External or Alarm. The relay output Relay output setup menu tree Configuring relay outputs using the front panel Alarm / energy pulsing LED setup Navigate to I/O configuration Energy Pulsing Disabled turns off the LED completely Second Alarms AlarmsAbout Alarms Alarm List of Standard 1-Second Over/Under Alarms How the power meter handles setpoint-driven alarms Digital Alarms Unary Alarms Alarm SetupAlarm Priorities Using an Alarm to Control a Relay and Digital Output Setting Up 1-Second Alarms Setting Up 1-Second Alarms Setting Up Unary Alarms Setting Up Digital Alarms Setting Up Digital Alarms Viewing Active Alarms and Alarm Counters Viewing Alarm Activity and History Viewing Unacknowledged Alarms and the Alarm History Log PowerLogic PM5300 series user guide Alarms Description Number of Registers Data Type Register Number Data LogsData Logs Memory Allocation for Log Files Alarm LogAlarm Log Storage Measurements and calculations Power factorReal-time readings Energy Power factor sign convention Power factor min/max conventionIEC mode Power factor minimum and maximum Ieee mode Power demand calculation methodsDemand Block interval demand Block interval demand example Synchronized demand Predicted demand Current demandThermal demand Thermal demand example Predicted demand example Peak demand Multi-tariff feature overview Multi-tariff featureMulti-tariff feature example Time of day mode overview Command mode overviewTime format Front panel date and time format Configuration 1 four tariffs with weekdays and weekends Example tariff configurations for a four-tariff systemTariff creation method Tariff Type Start date End date Start time End time Configuration 1 2 tariff assignment using 2 digital inputs1 Input mode overviewConfiguration 2 2 tariff assignment using 2 digital inputs Digital input requirements for required number of tariffs Configuring time of day mode tariffs using the front panel Configuring tariffs using the front panelTariff setup menu tree Time of day mode tariff setup Configuring input mode tariffs using the front panel Harmonic content calculations Power qualityHarmonics overview Total Harmonic Distortion and Total Demand Distortion Displaying harmonics data Viewing harmonics using the front panelTHD and thd calculations TDD calculation Power Quality display screen Viewing THD/thd using the front panelViewing TDD Example 13th to 21st harmonics for line-to-neutral voltage Related topics Accuracy test requirements Testing overviewVerifying accuracy Energy pulsing Reference device or energy standardLocation of energy pulsing LED PM5300 Verifying accuracy test Calculating the number of required pulses Calculating total powerPercent error calculation Total power limit for digital output Total power limit for alarm / energy LEDEnergy pulsing considerations VT and CT considerations Test points Typical sources of test errorsWatt-hour test points example Var-hour test points example Front panel meter reset screens Meter resetsGlobal resets Reset menu tree Single reset options Single resetsAlarm counter options Alarm counter Option Description PowerLogic PM5300 series user guideChapter 13-Meter resets 102 Password Recovery Maintenance and UpgradesPower Meter Memory Identifying the Firmware Version, Model, and Serial Number Additional Meter Status Information Control PowerDownloading Firmware Meter 105 TroubleshootingHeartbeat/Comms LED Potential Problem Possible Cause Possible Solution TroubleshootingGetting Technical Support Register List 106 MID Compliance Specifications relevant to MIDMID overview MID compliance for the meter MID Compliance Installation and wiring PM5331/PM5341 default screen Installing the terminal coversDefault PM5331/PM5341 display screen Location of terminal covers Lock-protected setup parameters MID-protected setup parametersLock-protected setup parameters Meter firmware version Initializing the meter Setting up the PM5331/PM5341 Locking or unlocking the meter Setting up lock passwordNavigate to Maint Setup Meter Lock 113 GlossaryTerms 114 115 Abbreviations 116 117 118 Page Schneider Electric 35, rue Joseph Monier CS