Panasonic KX-TVP200 B7.2 Port Setting, B7.3 PBX Interface Parameters, Port Setting Menu, Dtmf

B7 SYSTEM ADMINISTRATION—HARDWARE SETTINGS

B7.2 Port Setting

To access the proper menu for Port Setting, follow the menu path as shown:

System Administration Top Menu-1-6-2

Port Setting Menu

To access the proper menu Port Setting Menu for the selected port, follow the menu path as shown:

System Administration Top Menu-1-6-2-Port No.(1-12)

Table B-38

Parameter		Value Range	Description/Function
		(Default)
Flash Time	1. 100 ms		Specifies the duration of the flash (recall) signal that the
	2.	300 ms	VPS will send to the PBX. See the PBX manual to
	3.	600 ms	determine the correct value.
	4.	900 ms
		(100)
CPC Signal	1. None		Specifies the minimum time necessary to detect an
	2.	6.5 ms	interruption in the CPC (Calling Party Control) signal
	3.	150 ms	received from the PBX. The VPS is able to determine
	4.	300 ms	that the line has been disconnected when it detects an
	5.	450 ms	interruption of the CPC signal.
	6.	600 ms
		(6.5)
Disconnect		1-8 s	Specifies the length of time the line will temporarily be
Time		(2)	unavailable after a call has ended.
Dial Mode	1. DTMF		Specifies the dial mode for DTMF (touchtone) or Pulse.
	2.	Pulse 10 pps	If Pulse is specified, pulse speed (10/20 pps) must be
	3.	Pulse 20 pps	selected.
		(DTMF)
			Note: This setting only affects outward dialling from the
			VPS. The VPS can only receive DTMF (touchtone)
			signals.

B7.3 PBX Interface Parameters

Three separate parameters are used to program the VPS for optimal signalling and performance with the PBX.

Installation Manual 265