Panasonic KX-TVP200 installation manual Off-line Set Ofln, On-line Set Onln, Set Password Pass

7.2 UTILITY COMMANDS

7.2.1 Off-line Set (OFLN)

Use the OFLN command to turn off the VPS Answer Mode. Set the VPS to Off-Line Mode before deleting a mailbox, since this operation involves the updating of a large number of related parameters.

Type OFLN, then Press RETURN. If no VPS ports are in use, the VPS will immediately suspend the Answer Mode.

$ OFLN

** OFF LINE MODE **

If any VPS port is in use, the VPS will display the following warning:

*** Now line is used!! *** <WAIT>

The following message indicates that the VPS is in the Off-Line Mode.

** OFF LINE MODE **

7.2.2 On-line Set (ONLN)

Use the ONLN command to place the VPS in the Answer Mode.

Type ONLN, then Press RETURN.

$ ONLN

** ON LINE MODE **

7.2.3 Set Password (PASS)

Use the PASS command to create, change and clear system passwords. Valid passwords are created using up to 10 characters; any alphanumeric character, [(space)], [.] and [_] can be used.

IMPORTANT

•We strongly recommend that you set the password to 10 characters for maximum protection against hackers.

•Do not carelessly reveal the password to other persons.

•Please change the password periodically.

1.Type PASS, then Press RETURN.

$ PASS

1:Administrator Password 2: System Reset/Clear Password :=

2.To create a password or change an existing password, Go to Step 3. To clear a password, Go to Step 4.

Installation Manual 149