Panasonic KX-TVP200 installation manual Installation Steps

2.5 INSTALLATION STEPS

2.5INSTALLATION STEPS

The following is an overview of the standard installation process using DPT Integration. When necessary, other sections in this manual have been referenced for more detailed descriptions or instructions.

1.Obtain a list of current users, their extension numbers, their departments, and the type of systems they use (mailbox, no mailbox, beeper [pager], car phone, etc.).

2.Assess your customers’ needs before setting up the system. You will save yourself time later by giving customers what they need up front. Ask the office manager how the VPS will be used. Give examples.

Recommend that your customer use a word processor to log the greetings. You will find these files much more easily than the worksheet pages if you need to make changes down the road.

3.Connect the power cord to the VPS, then turn the power switch on.

CAUTION

The power supply cord is used as the main disconnect device. Ensure that the socket-outlet is located/installed near the equipment and is easily accessible.

4.Install optional port expansion cards (see 2.6 INSTALLING PORT EXPANSION CARDS: KX-TVP102 OR KX-TVP204).

5.Standard Initialisation (For DPT Integration Connection)

a)Program the ports of the PBX for voice processing (see Section 4 INTEGRATING THE VPS WITH THE PANASONIC KX-TD DIGITAL PBX).

Program the KX-TD500, the KX-TD1232, the KX-TD816 or the KX-TD612 for Voice Mail integration.

•KX-TD500, KX-TD816, KX-TD1232, KX-TD612

Note

The KX-TD500 is not sold in the United Kingdom. It is only available in some countries.

Programming may be performed on-site or at the office.

All memory is stored and will be retained when the unit is powered up as long as the Rotary Switch has been reset to position [0] prior to turning the unit off.

b)Turn the power switch off at the VPS.

c)Plug extension wire(s) from the PBX into VPS (see 2.7 CONNECTIONS).

d)Connect the personal computer to the VPS with a Null Modem Cable (see 2.8.2 Connecting the RS-232C Cable).

e)Set the Rotary Switch to position 5.

f)Turn the power switch back on at the VPS.

g)Wait until the "warning" appears on the screen.

h)Set the Rotary Switch back to position 0.

Installation Manual

37