Panasonic KX-TVP200 installation manual On Line MODE** is displayed

4.3CONNECTING THE VPS WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD612

11.Start up completed.

a)The Power Indicator light stops blinking when the start-up has been successful. (The delay varies according to the system’s condition.)

b)"**ON LINE MODE**" is displayed.

c)System prompt [> ] is displayed on the screen. To enter system administration, Press ENTER. All parameters can be set through the menu-driven programme.

When the System Administrator starts operation, the system asks for the terminal type. By choosing VT100 [2], all parameters can be set through the menu-driven programme.

Please Select Your Terminal Type.

1.ASCII TERMINAL

2.VT100

Please Enter the Number := ______

Please Enter the Number:= [2]

Select [2] because Quick Setup is only available when using a personal computer that can emulate a VT100 terminal.

12.Go to the System Administration Top Menu. Select [5] and Press ENTER, or Type [3] then QSET and Press ENTER for Quick Setup and follow the Auto Configuration Instructions.

TEST: Press the INTERCOM button and then [265]. If the VPS answers, you have a DPT connection.

Set the Rotary Switch to position 0 after initialisation is complete.

The required programming is complete and the VPS and KX-TD1232 should be able to communicate through DPT Integration.

We recommend that the KX-TD1232 system has any optional extension cards installed and telephones connected before starting the VPS.

When running the Quick Setup command (Section 5 CUSTOMISING THE SYSTEM) from the VPS, the PBX transmits the extension information automatically. This saves time when programming the VPS.

90

Installation Manual