-9-
WS-AT300 WS-AT350
Type 2 Way, Bass-reflex type Bass–reflex type
Input impedance 8 ohms
Power capacity 400 W (continuous program input) 400W (RMS)
200 W (RMS) —
Sound Pressure Level 99 dB [1 W, 1m (3.3 ft)] 92 dB [1 W, 1m (3.3 ft)]
Max. Sound Pressure Level 122 dB [1m (3.3 ft)] 118 dB [1m (3.3 ft)]
Frequency response 70 Hz - 18 000 Hz 30 Hz - 1 400 Hz
Crossover frequency 2 200 Hz —
Speaker
Woofer 38 cm (15”) cone speaker 38 cm (15”) cone speaker
Tweeter SCWG horn speaker —
Dispersion 60°(horizontal), 40°(vertical) —
Dimensions 480 (W) x 694 (H) x38 (D) mm [18-7/8” (W) x 27-5/16” (H) x 15” (D) ]
Weight 26 kg (57 lbs.) 26.5 kg (58 lbs.)
Finish
Enclosure Resin molded, Blue black
Front panel Punched grille, Blue black
Standard accessories Eyebolt (M8 x 25) ........................................... 2
Operating Instructions .................................... 1
BLOCK DIAGRAM
SPECIFICATIONS
!
@
Phone jack
SPEAKON
Connector
Tweeter
Woofer
Tweeter
Protector
Woofer
Protector
HPF
LPF
!
@
Phone jack
SPEAKON
Connector Woofer
WS-AT300
WS-AT350
• Dimensions and weight indicated are approximate.
• Specifications are subject to change without notice.
• True effective power measured by the test method prescribed by American National Standard EIA (Electronic Industries
Association), RS-426-A (1980).
In this test, the noise signal with a higher frequency power component was used to match the latest program sources.