Panasonic KX-TVP200 installation manual Notification Setting-Device 1, 2, or

B2 SYSTEM ADMINISTRATION—MAILBOXES

Notification Setting

Follow the procedure below to set the parameters for the Message Waiting Notification Device feature. A maximum of 3 destinations (Device 1, 2, 3) can be specified per mailbox.

•Class of Service programming determines if the subscriber is able to use this feature.

•If the destination device is a telephone, the subscriber will be called when he has message(s), and will have a chance to listen to the message(s).

•If the destination device is a beeper (pager), the subscriber will be notified when he has message(s). If the beeper (pager) has a display, it is possible to send to it a callback number. The caller can enter the callback number when he leaves a message. If he does not enter a callback number, either the System Callback No., or the caller’s number if it is received through a telephone company’s Caller ID service, will be sent instead.

To access the proper menu for Message Waiting Notification, follow the menu path as shown:

System Administration Top Menu-1-1-1-Mailbox No.-2-Device No. 1, 2, or 3.

Notification Setting-Device 1, 2, or 3

Table B-5

Parameter	Value Range	Description/Function
	(Default)
Dial Number	Up to 32 digits	Assigns a telephone or beeper (pager) number to
	consisting of 1-9,	Device 1, 2, or 3. The subscriber can also specify the
	0, , #	dial number from his telephone.
	P, T, M, X	P: Pause
	(None)	T: Dial Tone Detection
		M: Dial Mode Switching Code (Touchtone to Pulse, or
		Pulse to Touchtone)
		X: Callback Number Entry Code
		1-9, 0, , #: Dial Codes
		Note: The callback number entry code "X" must be
		included in the number to be called if the Beeper
		Callback No. Entry Mode is enabled through COS and
		"Type of Device" is set to "Beeper". The proper number
		of "Pauses" must be inserted before the callback entry
		code.
Type of Device	1. Telephone	Specifies the device to receive notification. This is
	2. Beeper	automatically set to "Beeper" when "X" is used in the
	(Telephone)	Dial Number (above). The subscriber can also specify
		the type of device from his telephone.

212 Installation Manual