Panasonic KX-TVP200 installation manual Transferred. The Extn. setting enter E enables

B5 SYSTEM ADMINISTRATION—SERVICE SETTINGS

Table B-16

Parameter	Value Range	Description/Function
	(Default)
Call Transfer	Extn./Mbx/No	Specifies the destination to which the call will be
Anytime	(Extn.)	transferred. The "Extn." setting (enter "E") enables
		callers to be transferred directly to their intended party
		by dialling the extension number. The "Mbx" setting
		(enter "M") enables callers to leave messages in a
		mailbox by entering the mailbox number. The "No"
		setting (enter "N") disables extension transfer and
		mailbox transfer; only 1-digit entries work (following the
		Custom Service menu).
		Note: This parameter should be set to "No" when
		Subscriber Service is specified as a Custom Service
		option and it is desired that digits can be entered very
		quickly to specify a mailbox. Therefore, in most cases,
		"No" is the best setting for this parameter. This is
		especially true if you do not want to explain "Call
		Transfer Any Time" in your Custom Service menu
		recording.
Wait for	1-5 s	Resolves the problem when the first digit of the
Second Digit	(1)	extension or mailbox number is the same as one of the
		Custom Service menu choices. The VPS waits the
		specified period of time for a second digit to be dialled.
		If the time period expires without a second digit being
		entered, the system assumes the caller has selected a
		menu choice. Use this parameter only if "Call Transfer
		Anytime" is set to "Extn." or "Mbx".
No DTMF Input	a-f	Specifies how to handle a call when there is no
Operation	(c)	response to the menu message. No response usually
	*See the following	indicates that the caller is using a rotary phone. The
	"Keypad	factory setting is "C. Operator", which allows the caller
	Assignment".	to be automatically connected to an operator after
		message playback.

238 Installation Manual