Panasonic KX-TVP200 Enter the jack number. Screen output # Stop Rec, Conditions None

4.4COMMON DPT INTEGRATION FEATURES AND SETUP PROCEDURES

5.Repeat these steps for each telephone.

4.4.4Live Call Screening Recording Mode Assignment via System Programming

This programme allows the VPS to continue recording the conversation in the mailbox after the extension intercepts the call during the Live Call Screening.

PC programming is also possible.

1.Enter [617] or [616] from system programme.

2.Press the NEXT button (SP-PHONE). Screen output: Jack No.?

3.Enter the jack number. Screen output: # _ _ :Stop Rec

(_ _ = the jack number you entered)

4.Press the SELECT button (AUTO-ANSWER) until the desired selection is displayed.

5.Press STORE.

6.Press the NEXT button (SP-PHONE).

7.Repeat the steps 4 to 6 until all jacks are programmed.

4.4.5Live Call Screening Private/Hands-Free Mode Assignment via Station Programming

This programme assigns a VPS response for when a message is being left in a mailbox. It determines whether an alert tone is sent or whether the recorded message is played through the built-in speaker of the extension. The default mode is hands-free. (This is station level programming and should be done at each individual telephone.)

PC programming is also possible.

1.Enter Station Programming:

a.With the phone on-hook, Press the PROGRAM button.

b.Dial [99]. (Display changes to PT-PGM Mode.)

2.Dial the code for the mode you want this telephone to have. Hands-Free = 11

Private = 12

Screen output: Hands-Free or Private

3.Press STORE.

4.To exit the Station Programming mode, Press the PROGRAM button or lift the handset.

5.Repeat these steps for each telephone.

Conditions: None

A single-line telephone that is connected to the same extension as a proprietary telephone can also be used to monitor an incoming message. Be sure that Live Call Screening on the connected proprietary telephone has been activated. This feature is useful when you are using a cordless telephone. The handset sounds an alert tone to let you know that a message is being recorded. To intercept the call, hang up and go off-hook.

Installation Manual

97