Panasonic KX-TVP200 installation manual Type SAVE, then Press Return

7.2 UTILITY COMMANDS

to execute this command for all the data selected. When performing this operation, always wait until the process completion indication appears.

WARNING

Never save (back-up) and upload the "Program" without your dealer’s support.

The memory required to save each data component is indicated below.

1.Program—approximately 2 Mbytes (See Warning above)

2.Parameters—approximately 4.4 Mbyte (System Configuration)

3.System Prompts—approximately 23 Mbytes (Do not save—prompts are saved as defaults in the drive)

Saving items 4-7 below will depend upon the length of the recorded messages.

4.User Prompts-1 (Modified prompts—Modifications to default settings)

5.User Prompts-2 (Modified prompts—Modifications to default settings)

6.Custom Service Menus (Custom service recordings)

7.Personal Greetings (Subscriber greetings)

8.Company Greetings

1.Type SAVE, then Press RETURN.

$ SAVE

VPS Disk Data Save (VPS -> PC : Xmodem)

1:Program

2:Parameters

3:System Prompts

4. User Prompts-1

5. User Prompts-2

6. Custom Service Menus

7. Personal Greetings

8. Company Greetings Selection No. :=

2.Select item to be backed up, then Press RETURN. The size of the file will be displayed.

To start press 'RETURN'

3.Press RETURN.

-- - - - - SAVE Start!!

4.Perform a Standard File Transfer. Set the data terminal to the receiving (Answer) mode (Xmodem) and specify the backup filename. The specified data will be transmitted to the data terminal.

Notes

•The data terminal that you use must be equipped with communications software that supports the Xmodem file transfer protocol. The command can be cancelled by Typing [\] before entering the receiving mode. Once the receiving mode has been selected, use the cancel command of the communication software being used.

154 Installation Manual