Chapter 2 Installing the Remote Annex 6300
Connecting the Remote Annex to a LAN requires the following equipment:
❑The appropriate network cable (e.g., Ethernet transceiver cable) for connecting to a LAN or an Ethernet loopback connector.
❑The console port cable (supplied with software) and a console terminal.
Installing the Remote Annex 6300 in a Rack (Optional)
Installing the Remote Annex 6300 in a rack is optional and requires the following equipment:
❑Mounting brackets, front and back
❑Hardware kit
❑Phillips screwdriver
The following paragraphs contain a description of how to mount the
Remote Annex 6300 in a rack. The device can be mounted in two ways:
❑Front Mount
❑Rear Mount
Front Mount
The Remote Annex 6300 is mounted to the front of the rack by attaching the front mounting bracket to the device and then attaching the device and mounting bracket to the rack.
