Chapter 2 Installing the Remote Annex 6300
To boot your Remote Annex 6300 from Flash ROM.
1Enter the ROM Monitor prompt from the console.
2Set the Internet address to a valid IP address and the subnet mask to a valid mask using the addr command.
3Set the interface sequence to self using the sequence command.
4Boot the unit.
Invoking the Console Monitor
After the image boots, you can invoke a Console Monitor by pressing Return on the console. At the Console Monitor prompt, entering help or ? displays the available options:
❑dump (from the Remote Annex to the host and reboots).
❑help or ? (displays the available options).
❑info (displays configuration information for the Remote Annex).
❑leds (displays the current front panel LED status).
❑quit (exit the Console Monitor, e.g., quiet the console).
❑reboot filename (reboots the Remote Annex).
❑rom (returns the Remote Annex to the ROM Monitor).
❑syslog (displays syslog messages).
