Nortel Networks 6300 manual Eof

Chapter 3 ROM Monitor Commands

Use boot –lonly when reloading your Flash memory. Typically, you reload your Flash memory when you are upgrading to a new version of software.

Make sure that you have a properly configured load host available or you will erase erase your image from Flash and will not be able to load a new one.

The boot –vcommand displays the boot in verbose mode. This output includes the turnaround time in milliseconds for each request. This value equals the time lapse between sending the request and receiving the proper reply from the host.

When the boot is complete, verbose output includes a display of network statistics:

monitor:: boot –v

Enter boot file name [(ip) “oper.63.enet”, \ (mop) “OPER_63_ENET.SYS”]::

Requesting default boot file “OPER_63_ENET.SYS” for MOP/VMS\ loads and “oper.63.enet” for all other protocols.

Unanswered requests shown as ‘?’, transmission errors as ‘*’.

	Requesting boot						from 192.9.200.88 via								Ethernet...
	Booting			from 192.9.200.88							(42		msec)
	Header received						OK.		Received data blocks shown							as msec
	turnaround time.
4 4 6 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 4 4 4 4 4
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 4 4 4 4 4 4 4 4 4 4 4 4 4 5 4 4
4 4 4 4 4 6 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 4 4
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 4 24 4 4 6 4 10 4 6
73 4 4 5 4 4 4 4 4 9 4 4 11 4 4 4 4 4 4 4 4 4 4 4 4 4 3 4 4 4 4 4
4 4 6 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 11 6 4 4 4 4
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
4 4 4 4 4 6 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 4 4
4	4 4	4	4	4	4 4	4	4	4 4	4	4	4	4 4 4 4		6	EOF
		Ethernet Statistics
		Frames Received:							1031				Frames Sent:				1031
		CRC Errors:							0				Carrier Sense Losses:				0
		Alignment Errors:							0				Clear to Send Losses:				0
		Resource Drops:							9				Collisions Detected:				9
		Bus Wait Drops:							0				Excessive Collision Losses:				0
		Bad Types/Lengths:							0

3-12 Remote Annex 6300 Hardware Installation Guide