Nortel Networks Disassembly Instructions, Figure C-1. Removing the Remote Annex 6300 Cover

Appendix C Modem Carrier Card Upgrade Instructions

Disassembly Instructions

The following instructions describe how to disassemble the Remote Annex 6300. These instructions assume that you are facing the unit’s rear panel. Figure C-1 illustrates the instructions.

1Unplug the unit.

2Disconnect all the cables.

3Remove the screws from the side and back of the unit.

4Slide the cover back and lift the cover vertically (see Figure C-1).

Screws

(17 places)

Figure C-1. Removing the Remote Annex 6300 Cover

C-2 Remote Annex 6300 Hardware Installation Guide