Nortel Networks 6300 manual Attaching the Mounting Bracket to the Remote Annex

Chapter 2 Installing the Remote Annex 6300

Attaching the Mounting Bracket to the Remote Annex 6300

Attach the front mounting bracket to the Remote Annex 6300 as follows:

1Remove the mounting bracket from its package.

2Remove three screws from the front of the cover on each side of the Remote Annex 6300, as shown in Figure 2-1. Save these screws; you will need them later to install the front mounting bracket.

3Install front mounting bracket to the device using the six screws previously removed.

4Tighten the screws to secure the bracket to the device.

Screws

(3 places each side)

Figure 2-1. Attaching the Mounting Bracket to the Remote Annex 6300

Remote Annex 6300 Hardware Installation Guide 2-3