Chapter 2 Installing the Remote Annex 6300
Connecting Thick Ethernet (10Base5) Cable
To connect Thick Ethernet (10Base5) or equivalent transceiver cable, you must have already installed a 10Base5 Ethernet network cable. Follow these steps to connect the Remote Annex 6300 to a Thick Ethernet cable (see Figure
1Make sure the transceiver cable is plugged into the Ethernet network.
2Push the slide mechanism on the Remote Annex 6300’s Thick Ethernet connector to the right and plug in the transceiver cable.
3Push the slide mechanism to the left to secure the connection.
Figure 2-7. Connecting Thick Ethernet Cable
Remote Annex 6300 Hardware Installation Guide |
