Connecting the speakers
Connecting the speakers to the Lifestyle® media center
Figure 11
Connecting the speakers to the Lifestyle ® media center
CAUTION | AVIS |
RISK OF ELECTRICAL SHOCK | RISQUE DE CHOC ELECTRIQUE |
DO NOT OPEN | NE PAS OUVRIR |
LIFESTYLE POWERED SPEAKER SYSTEM | TO ACCESSORY SPEAKER ONLY |
BLACK TO BLACK | RED TO RED |
VOLTAGE SELECTOR |
|
POWER | AUDIO |
| INPUT |
| SELECT |
115V | PROPER |
VOLTAGE |
|
| REFER TO OWNER’S |
115/230V | AC | MANUAL FOR FULL |
50/60Hz 30W MAX. | INSTRUCTIONS | |
POWERED [LEFT] SPEAKER | LSSP1U | 100823. | E9931 |
FIX
Note: To extend the length of the cables, use the supplied
To connect the Lifestyle® powered speaker system to your media center refer to Figure 11. Then follow these steps:
1.Make sure all components are unplugged from the AC power (mains) outlet before making any connections.
2.Connect the attached
3.Attach the smaller connector on the
Setting up the Zone 2 remote control
You must set up a second remote control to operate the ZONE 2 output.
1.Remove the remote control battery cover and locate the miniature switches (Figure 12a).
2.Make sure the house code settings (switches 1, 2, 3, and 4) match those on your first remote.
3.Make sure switches 5, 7, and 8 are up, and 6 and 9 are down.
Note: Refer to your Lifestyle® system owner’s guide for more information on operating your system in more than one room.
Figure 12a
ON
Setting up a Zone 2 remote control
Note: If you would like to adjust volume using your Lifestyle® powered speaker system’s volume control knob instead of a remote control, change “Zone 2 Protocol” to “Legacy” in the last (3 of 3 screen) system settings menu.
10 | December 20, 2001 | AM262842_00_V.pdf |
