Bose Surround Sound Speaker System Setting up the remote control, Connecting power to your system

Figure 13

Connecting the speakers to the Model 20 music center

Connecting the speakers to the Model 20 music center

CAUTION AVIS

RISK OF ELECTRICAL SHOCK	RISQUE DE CHOC ELECTRIQUE
DO NOT OPEN	NE PAS OUVRIR

LIFESTYLE POWERED SPEAKER SYSTEM TO ACCESSORY SPEAKER ONLY

VOLTAGE SELECTOR VAR

115V

POWERED [LEFT] SPEAKER LSSP1U 100823. E9931

To connect the Lifestyle® powered speaker system to your Lifestyle® system refer to Figure

13. Then follow these steps:

Note: When making the connections, be sure to always connect the RED ends of the speaker wire to the RED ends of the other wire or terminal.

1.Make sure all components are unplugged from the AC power (mains) outlet before making any connections.

2.Connect the attached 6-foot audio input cable to the supplied 3-foot adapter cable labeled VAR on the single-connector end.

3.Attach the other end of the 3-foot VAR adapter cable to the ZONE 2 output jack on the rear of the Model 20 music center (not shown).

Note: To extend the length of the cables, use the supplied 50-foot extension cable (shown in dotted line above). This cable connects the 6-foot audio input to the 3-foot VAR adapter cable.

Setting up the remote control

You must set up a second remote control to operate the ZONE 2 output.

1.Remove the remote control battery cover and locate the miniature switches (Figure 14).

2.Make sure that the house code settings (switches 1, 2, 3, and 4) match those on your first remote.

3.Slide switch 8 up.

Figure 14

Setting up the RC-20 remote control

Connecting power to your system

CAUTION: If you purchased a dual-voltage system, it is important that you set the speakers to the correct voltage. To do this, refer to “Selecting the correct voltage” on page 5.

Follow these steps to connect power to your Lifestyle® powered speaker system:

1.With the volume control on the left speaker turned all the way down (counterclockwise), plug the power cord from the left speaker into an AC power (mains) outlet.

2.Insert the power cord of the Lifestyle® system into an AC power (mains) outlet.

3.Set the volume control for the speakers to the two-o’clock position and turn on your music.

12 December 20, 2001 AM262842_00_V.pdf