Nortel Networks 6300 manual Stats command display looks like this

Chapter 3 ROM Monitor Commands

stats

The stats command displays current network statistics gathered by the ROM. Use stats along with the boot command to help isolate problems. Table 3-2 describes the network statistics displayed by the stats command. The syntax is:

stats

The stats command display looks like this:

monitor:: stats
Ethernet	Statistics
Frames Received:		398	Frames Sent:	3
CRC Errors:		0	Carrier Sense Losses:	0
Alignment Errors		0	Clear to Send Losses:	0
Resource	Drops:	0	Collisions Detected:	0
Bus Wait	Drops:	0	Excessive Collision Losses:	0
Bad Types/Lengths:		0

Table 3-2. Network Statistics

Statistic	Description
Frames Received	The number of frames received.
CRC Errors	The number of CRC checksum errors detected.
Alignment Errors	The number of frames received misaligned with a
	CRC error.
Resource Drops	The number of packets dropped because the ROM
	code could not buffer them quickly enough. The
	ROM code cannot always handle back-to-back
	incoming packets. The Remote Annex accepts the
	first response it receives and drops all others.
	Dropped packets are normal.

(continued on next page)

Remote Annex 6300 Hardware Installation Guide 3-29