Nortel Networks manual Normal Mode Remote Annex 6300 Diagnostics

Activity N1: Testing LEDs

Chapter 4 Troubleshooting Procedures

Normal Mode Remote Annex 6300 Diagnostics

Following power-up or reset, the Remote Annex 6300 enters Normal mode. The following subsections describe both the possible error and error-free conditions that can occur during power-up and booting in Normal mode.

Normal Mode Error-free Sequence

Table 4-2 summarizes the LED display states during error-free power-up in Normal mode. The following subsections describe these states.

Table 4-2. Normal Mode Error-free LED States

	STAT	ATTN	TRAF
Activity	Green	Amber	Green
N1: LEDs OK	●	●	●
N2: Hardware OK	●	✕	●

Key:

●On continuously.

✕Off.

■Flashing irregularly.

◆Flashing regularly (about 1Hz).

All front panel LEDs light for a few seconds, then all but the Ethernet LED (segment LED) turn off, confirming that all LEDs are operational.

Remote Annex 6300 Hardware Installation Guide 4-5