Chapter 3 ROM Monitor Commands
config
The config command displays the current configuration information and revision levels for the Remote Annex 6300. The config command displays revision information, the amount of memory installed, T1 or E1 configuration information, and a description of the number and type of modems installed. The command syntax is:
config
The config command display for a Remote Annex 6300 with 24 modems (T1) looks similar to this:
|
| REVISION/CONFIGURATION INFORMATION |
|
|
|
| ||||||
ROM Software Rev: 1002 |
|
|
|
|
|
|
|
|
|
| ||
Board ID: 63 |
|
|
| Board Type: RA6300 |
|
|
|
|
| |||
CPU Type: 486DX2 |
|
| Ethernet Address: |
|
| |||||||
Memory size: 8 Meg |
| EEPROM size: 65504 |
|
|
|
|
| |||||
Flash size: 2 Meg |
|
| Flash ID: 8989 |
|
|
|
|
|
| |||
Available Interfaces ( *= selected) ThickNet ThinNet *Twisted Pair |
| |||||||||||
SLC Local DRAM Size: 4 Meg | SLC SRAM Size: 128 K |
|
|
|
|
| ||||||
TDM Interface: PRI T1 USA | Revision: VERSION A MGR=1.117 |
|
|
| ||||||||
Modem Country Code : 63 |
|
|
|
|
|
|
|
|
|
| ||
Port # | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
Modem ID | 2883 | 2883 | 2883 | 2883 | 2883 | 2883 | 2883 2883 | 2883 | 2883 | 2883 | 2883 | |
Mod Status | OK | OK | OK | OK | OK | OK | OK | OK | OK | OK | OK | OK |
Port # | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 |
Modem ID | 2883 | 2883 | 2883 | 2883 | 2883 | 2883 | 2883 2883 | 2883 | 2883 | 2883 | 2883 | |
Mod Status | OK | OK | OK | OK | OK | OK | OK | OK | OK | OK | OK | OK |
|
|
|
|
|
|
|
|
|
|
|
|
|
This display is typical for T1 versions. For E1 versions, information on 32 ports will be shown. For
Remote Annex 6300 Hardware Installation Guide |
